ORALS

Shape memory alloys take place in a class of adaptive structural materials called intelligent or smart materials by giving stimulus response to changes in the external conditions. These alloys exhibit dual characteristics, from viewpoint of shape reversibility, shape memory effect and superelasticity with the recoverability of two shapes at different conditions. These alloys are functional materials with these properties and used as shape memory elements in many interdisciplinary fields. Shape memory effect is initiated with thermomechanical treatments on cooling and deformation and performed thermally on heating and cooling, with which shape of the materials cycles between original and deformed shapes in reversible way. Therefore, this behavior can be called Thermoelasticity. Deformation in low temperature condition is plastic deformation, with which strain energy is stored in the materials and releases on heating by recovering the original shape. This phenomenon is governed by the thermomechanical and thermoresponsive transformations, thermal and stress induced martensitic transformations. Thermal induced martensitic transformations occur on cooling with cooperative movement of atoms in -type directions on {110} - type plane of austenite matrix along with the lattice twinning reaction and ordered parent phase structures turn into the twinned martensite structures. Twinned structures turn into detwinned martensite structures by means of stress induced martensitic transformations with deformation. On heating after these treatments, detwinned martensite structures turn into the ordered parent phase structures, by means reverse austenitic transformation. Superelasticity is performed in only mechanical manner by stressing and releasing the material in elasticity limit at a constant temperature in the parent austenite phase region, and shape recovery occurs instantly upon releasing, by exhibiting the elastic material behavior. Therefore, this behavior can be called mechanical memory. Superelasticity is performed in non-linear way, unlike normal elastic materials behavior, loading and releasing paths are different in stress-strain diagram, and cycling loop refers to the energy dissipation. Superelasticity is also result of stress induced martensitic transformation, and the ordered parent phase structures turn into the detwinned martensite structures by stressing the materials. It is important that lattice twinning and detwinning reactions play important role in martensitic transformations.Copper based alloys exhibit this property in metastable beta-phase region. Lattice twinning and lattice invariant shear is not uniform in these alloys and cause the formation of complex layered structures. The layered structures can be described by different unit cells as 3R, 9R or 18R depending on the stacking sequences on the close-packed planes of the ordered lattice. The unit cell and periodicity are completed through 18 layers in direction z, in case of 18R martensite in ternary copper-based alloys, and unit cells are not periodic in short range in direction z.In the present contribution, x-ray diffraction and transmission electron microscopy (TEM) studies were carried out on copper based CuAlMn and CuZnAl alloys. X-ray diffraction profiles and electron diffraction patterns exhibit super lattice reflections. X-ray diffractograms taken in a long-time interval show that diffraction angles and intensities of diffraction peaks change with the aging duration at room temperature.  This result refers to the rearrangement of atoms in diffusive manner.