ORALS
SESSION:
IronSatPM1-R8
| Usui International Symposium on Advanced Sustainable Iron and Steel Making (7th Intl. Symp. on Advanced Sustainable Iron and Steel Making) |
| Sat Oct, 26 2019 / Room: Ambrosia B (77/RF) | |
| Session Chairs: Cyro Takano; Mery-Cecilia Gomez-Marroquin; Session Monitor: TBA |
15:15: [IronSatPM108] Keynote
EFFECT OF BENTONITE ON THE STABILIZATION AND MECHANICAL STRENGTH OF BRICKS MADE OF PERUVIAN ELECTRIC ARC FURNACE DUSTS Mery-cecilia
Gomez Marroquin1 ; Jose Carlos
D Abreu
2 ;
1National University of Engineering, Lima, Peru;
2PUC-Rio, Rio de Janeiro, Brazil;
Paper Id: 326
[Abstract] One of the most important problems of the steelmaking industry is the recycling of galvanized steel scrap and the benefit or disposal of the powders produced in the Electric Arc Furnaces (EAFD) and LD / BOF converters. This issue is well-known worldwide. Transportation costs, disposal in appropriate places and increasing environmental demands are making many steel companies in the world look for ways to avoid, minimize and / or treat their powders and particulates correctly. The methodology of the project consists of collecting, sampling, selecting and molding the raw materials involved: powders from electric steelworksor Electric Arc Furnace Dust-EAFD, bentonite-Ben., refractory clay-AR and construction cements. Following that, these materials were characterized partially. Afterwards, heating tests were carried out on mixtures of EAFD and bentonitein, in the form of cylindrical briquettes, using electric ovens to evaluate how preset factors favorably influence the porosity response variable. This experience also provided the proportion in optimal weight of the mixtures. These proportions were used to form test bricks with all the aforementioned raw materials in order to evaluate the effect of their new factors on another variable responses to the resistance towards compression. All these tests were carried out according to experimental planning with the simple factorial method 23 that evaluated the effect of the factors using the COLMEIA software. It can be concluded that: A> B> AB, where the individual synergy of (A) EAFD / Ben. is more influential than the one of (B) Heating temperature. This in turn is more influential than the double synergy (A) EAFD / Ben. and (B) Heating temperature or AB in the porosity of the cylindrical briquettes formed of EAFD and bentonite. During the second run the result of A> AC explains that the individual synergy of (A) EAFD / Ben. is more influential than the dual synergy of (A) EAFD / Ben. and (C) Setting time or AC in the compressive strength of the set of test bricks. This compressive strength was based on electric steel, bentonite, refractory clay and construction cement powders.
Finally, it is concluded that in both experiences, the proportion PAE / Ben. = 7/3 is the optimal mixture and therefore, the factor most influential in the porosity-stabilization and resistance to compression or mechanical strength of the specimens was tested.
References:
[1] Autelitano Federico, Giuliani Felice (2016). Electric arc furnace slags in cement-treated materials for road construction: Mechanical and durability properties. Construction and Building Materials 113 (2016) 280–289.
[2] Alanyalı, H., Çöl, M., Yılmaz, M., & Karagöz, Ş. (2006). Application of magnetic separation to steelmaking slags for reclamation. Waste Management, 26(10), 1133-1139.
[3] Barrenechea Camila, Fernández A. Inés, Niubóa Maria, Chimenos José M., Espiell Ferran, Segarraa Mercè, Solé Cristian, Cabeza Luisa F. (2013). Development and characterization of new shape-stabilized phase change material (PCM)-Polymer including electrical arc furnace dust (EAFD), for acoustic and thermal comfort in buildings. Energy and Buildings 61 (2013) 210–214.
[4] Colorado. Henry A., García Edwin, Buchely M. F., (2016). White Ordinary Portland Cement blended with superfine steel dust with high zinc oxide contents. Construction and Building Materials 112 (2016) 616-824.
[5] Da Luz Adao Benvindo; Fernando Antonio Freitas Lins (2005). Rochas & Minerais Industriais. Usos e Especificaçoes 5ta. Edición. Editorial CENTRO DE TECNOLOGIA MINERAL. MINISTERIO DA CIENCIA E TECNOLOGIA-CETEM pp. 217-230.
[6] Da Luz Adao Benvindo; De Almeida Salvador Luiz M. (2012). Manual de agregados para la construcción civil. 2da. Edición. Editorial CENTRO DE TECNOLOGIA MINERAL. MINISTERIO DA CIENCIA E TECNOLOGIA-CETEM pp. 217 – 218, 22-223,
[7] Drobíková, K., Plachá, D., Motyka, O., Gabor, R., Kutláková, K. M., Vallová, S., & Seidlerová, J. (2016). Recycling of blast furnace sludge by briquetting with starch binder: Waste gas from thermal treatment utilizable as a fuel. Waste Management, 48, 471-477.
[8] Etxeberria, M., Pacheco, C., Meneses, J. M., & Berridi, I. (2010). Properties of concrete using metallurgical industrial by-products as aggregates. Construction and Building Materials, 24(9), 1594-1600.
[9] Gómez Marroquín, Mery Cecilia (2008). “CARACTERIZAÇÃO E CINÉTICA DA REDUÇÃO DE FERRITA DE ZINCO PRESENTE EM POEIRAS DE ACIARIA, POR MISTURAS CO-CO2”.Tesis de Doctorado presentada al
[10] Departamento de Ciencia de los Materiales y Metalurgia - DCMM de la Pontificia Universidad Católica de Rio de Janeiro. BRASIL.
[11] Karayannis, V. G. (2016). Development of extruded and fired bricks with steel industry byproduct towards circular economy. Journal of Building Engineering, 7, 382-387.
[12] Lian, F., Ma, L., & Chou, K. (2017). Industrial research on the high-temperature modification of Basic Oxygen Furnace slag with solid waste compound. Journal of Cleaner Production, 143, 549-556.
[13] Loayza Alexandra, Cifuentes Sergio, Colorado. Henry A. (2017). Asphalt modified with superfine electric arc furnace Steel dust (EAF dust) with hih zinc oxide content. Construction and Building Materials 145 (2017) 538-547.
[14] Madias Jorge, 2014. Innovaciones Tecnológicas. Reciclado del Polvo del Horno Eléctrico. Disponible en el sitio web: https://www.researchgate.net/publication/261365779_Reciclado_de_polvo_de_horno_electrico
[15] Mohammad A.T. Alsheyaba, Taisir S. Khedaywi (2013). Effect of electric arc furnace dust (EAFD) on properties of asphalt cement mixture. Resources, Conservation and Recycling 70 (2013) 38–43.
[16] Monteiro, S. N., & Vieira, C. M. F. (2014). On the production of fired clay bricks from waste materials: A critical update. Construction and Building Materials, 68, 599-610.
[17] Pickles, C.A. (2010). Thermodynamic modelling of the formation of zinc–manganese ferrite spinel in electric arc furnace dust. Journal of Hazardous Materials 179 (2010) 309–317.
[18] Quijorna N., de Pedro M., Romero M., Andrés A. (2014). Characterisation of the sintering behaviour of Waelz slag from electric arc furnace (EAF) dust recycling for use in the clay ceramics industry. Journal of Environmental Management 132 (2014) 278-286.
[19] Pelino, M., Karamanov, A., Pisciella, P., Crisucci, S., & Zonetti, D. (2002). Vitrification of electric arc furnace dusts. Waste Management, 22(8), 945-949.
15:40 Break
