Publication

Diffusion Coating

• D. Shechtman and S. Niedviedz, "Influence of chromium Diffusion Coating on Fatigue Behavior", Materials Science and Engineering 5 (1969/70), 35-42.
• S. Dirnfeld, D. Shechtman and S. Nadiv, "Manganese Diffusion Coating of Steels", J. Iron and Steel Inst. (1972), 669-674.
• S.F. Dirnfeld and D. Shechtman, "Influence of Manganese Diffusion Coating on Fatigue Behavior of Steels", Metals Science, 14(10) (1980), 509-511.

• E. Beraha and D. Shechtman, "Microprobe analysis in Conjunction with Color Etching", Practical Metallography 9 (1972), 161-165.

• D. Shechtman and E. Gutmanas, Transmission Electron Microscopy of Metallic Powders", Prakt. Metallogr. 18(12) (1981), 587-593.
• D.G. Brandon and D. Shechtman, "The Channel Plate Image Intensifier in the Electron Microscope", 7th International Electron Microscopy Conference, Grenoble, France (1970), 343.
• D. Shechtman and D.G. Brandon, "Experiments with a Conical Opaque Stop" ibid, 41
• D. Shechtman and E.Y. Gutmanas, "Transmission Electron Microscopy of Cold Sintering Metallic Powders", ibid.

• D. Shechtman, "Fracture-Microstructure Observations in the S.E.M.",Met. Trans. 7A (1976), 151-152.
• H.A. Lipsitt, D. Shechtman and R.E. Schafrik, "The Deformation and Fracture of Ti3Al at Elevated Temperatures", Met. Trans. 11A (1980), 1369-1375.

• D. Shechtman and D.G. Brandon, "Orientation Dependent Slip in Titanium", J. Mat Sci. 8 (1973), 1233-1237.
• D. Shechtman, M.J. Blackburn and H.A. Lipsitt, "The Plastic Deformation of TiAl", Met. Tran. 5 (1974).
• D. Shechtman, and L.A. Jacobson, "Deformation Modes in NbAl3", Met. Trans. 6A (1975), 1325-1328.
• H.A. Lipsitt, D. Shechtman and R.E. Schafrik, "The Deformation and Fracture of TiAl at Elevated Temperatures", Met. Trans. 6A (1975), 1991-1996
• D. Shechtman and D. Eylon, "On the Unstable Shear in Fatigued Annealed Ti-11and IMI 685 Alloys", Met. Trans. 9A (1978), 1018-1020.
• H.A. Lipsitt, D. Shechtman and R.E. Schafrik, "The Deformation and Fracture of Ti3Al at Elevated Temperatures", Met. Trans. 11A (1980), 1369-1375
• Y. Me-Bar and D. Shechtman, "On the Adiabatic Shear of Ti-6Al-4V Ballistic Targets", Materials Science and Engineering, 58 (1983), 181-188
• S.F. Dirnfeld, D. Shechtman and J. Mironi, "Microstructure and Mechanical Properties of Unidirectionally Solidified Ni-Sn Eutectic Alloys", Materials Science and Engineering, Vol. 68, No. 2 (1985) 183-190.
• A. Rotem, D. Shechtman and a. Rosen, "Correlation among Microstructure, Strength and Electrical Conductivity of Cu-Ni-Be-Alloy", Met. Trans. 19A (1988) 2279-2285.
• D. Josell, D. van Heerden, D. Read, J. Bonevich and D. Shechtman, "Tensile Testing Low Density multilayers: Aluminum/Titanium", J mater. Res. Vol 13 No 10, Oct. 1998
• D. Josell, D. Van Heerden, D. Shechtman and D. Read, "Mechanical Properties of Multilayered Matrials" J.of Nanostructured Materials. Submitted June 1998
• G.H. Cao a, D. Shechtman, D.M. Wu a, A.T. Becker, L.S. Chumbley, T.A. Lograsso, A.M. Russell, K.A. Gschneidner Jr. "Determination of Slip Systems and Their Relation to the High Ductility and Fracture Toughness of the B2 DyCu Intermetallic Compound" Acta Materialia 55 (2007) 3765- 3770
• D. van Heerden, D. Josell and D. Shechtman "Tensile tests of low density multilayer thin films" Proceedings of the MRS symposium "Policrystalline thin films II" MRS Fall Meeting , 1995

• Yearim and D. Shechtman, "The Structure of Rapidly Solidified Al-Fe-Cr Alloys", Met. Trans. 13A (Nov. 1981), 1891-1898
• D. Shechtman, R.J. Schaefer, and F. S. Biancaniello, "Precipitation in Rapidly Solidified al-Mn Alloys", Met. Trans. 15A, 11 (1984) 1987-97.
• D. Shechtman, W.J. Boettinger, T.Z. Kattamis and F.S. Biancaniello, "The Microstructure of Rapidly solidified NiAl-Cr Quasibinary Eutectic",Acta Metall. 32 (1984) 749-756.
• W.J. Boettinger, D. Shechtman, R.J. Schaefer, and F.S. Biancaniello, "The Effect of Solidification Velocity on the Microstructure of Ag-Cu Alloys", Met. Trans. 15A (1984) 55-66.
• S.F. Dirnfeld, D. Shechtman and J. Mironi, "Microstructure and Mechanical Properties of Unidirectionally Solidified Ni-Sn Eutectic Alloys", Materials Science and Engineering, Vol. 68, No. 2 (1985) 183-190.
• S.F. Dirnfeld and D. Shechtman, "Microstructure and Crystallography of Unidirectionally Solidified Ni-W Eutectic Alloy", Met. Trans. 16A (July 1985) 1185- 1193.
• L. Bendersky, R.J. Schaefer, F.S. Biancaniello and D. Shechtman, "Rapidly Solidified al-Cr Alloys: Structure and Decomposition Behavior", J. Mat. Sci., 21, 1889 (1986).
• A. Rotem, D. Shechtman and a. Rosen, "Correlation among Microstructure, Strength and Electrical Conductivity of Cu-Ni-Be-Alloy", Met. Trans. 19A (1988) 2279-2285
• I. Levi and D. Shechtman, "The Microstructure of Rapidly Solidified Ti-Fe Melt-Spun Ribbons", Met. Trans. 20A 1841 (1989).
• D. Shechtman, A. Feldman, M.D. Vaudin and J.L. Hutchison, "Moire-Fringe Images of Twin Boundaries in Chemical Vapor Deposited Diamond, Appl. Phys. Lett. 62 (5), 1 February 1993.
• D. Shechtman, J.L. Hutchison, L.H. Robins, E.N. Farabaugh and A. Feldman, "Growth Defects in Diamond Films", J. Mater. Res., Vol. 8, No. 3, 473 (1993).
• D. Shechtman, A. Feldman and J.l. Hutchison, "High Order Twin Boundaries in CVD Diamond",Materials Letters Vol. 17 (5) 211 (1993).
• D. Shechtman, "Twin Determined Growth of Diamond Wafers", Materials Science and Engineering A184 (1994) 113
• D. Shechtman, D. van Heerden and D. Josell, "fcc Titanium in Ti-Al Multilayers", Materials letters 20 (1994) 329
• D. van Heerden, E. Zolotoyabko and D. Shechtman, Microstructural and Structural Characterization of Electrodepositted Cu/Ni multilayers" Materials letters(1994)
• I. Goldfarb, E. zolotoyabko, A. Berner and D. Shechtman, "Novel Specimen preparation Technique for the Study of multi component Phase Diagrams" Materials Letters 21 (1994) 149-154. (1994).
• D. Josell, D. Shechtman and D. van Heerden, "fcc titanium in Ti/Ni multilayers",Materials Letters 22 (1995) 275-279.
• D. van Heerden, D. Josell and D. Shechtman, "The formation of fcc titanium in titanium/aluminum multilayers", Mater. vol 44 no 1 (1996) 297-306
• D. van Heerden, E. Zolotoyabko and D. Shechtman, "Microstructural and strain in electrodeposited Cu/Ni multilayers" J. Matr. Res., vol. 11, No. 11, Nov. 1996.
• T. Tepper, D. Shechtman, D. van Heerden and D. Josell, "Fcc Titanium in Titanium/Silver Multilayers" Materials Letters, 33 (1997) 181-184
• T. Tepper, D. Shechtman, D. van Heerden and D. Josell, "Allotropic Phase Formation in Ti/Zr Multilayers", Materials Letters 35 (1998) 100-107
• D. Shechtman "Twin quintuplet Surfaces in CVD diamond" J Mater Sci 41(2006) 7720-7724
• Crystal structure of a new quaternary Mg-Zn-Ca-Li phase. Author(s): Remennik Sergei; Xu Chunjie; Brant Reut; et al. Source: INTERMETALLICS Volume: 22 Pages: 62-67 DOI: 10.1016/j.intermet.2011.09.013 Published: MAR 2012
• D. Shechtman, S.D. Ridder and R. Mehrabian, "The Structure of Micro particles made by the MPP Technique", Proceedings of the Third Conference of Rapid Solidification Processing, National Bureau of Standards, Gaithersburg, MD, U.S.A., December 1982.
• W.J. Boettinger, R.J. Schaefer, F. Biancaniello and D. Shechtman, "The Effect of Solidification Velocity on the Microstructure of Ag-Cu Alloys", ibid.
• D. Shechtman, T.Z. Kattamis, F.S. Biancaniello and W.J. Boettinger, "The Microstructure of Rapidly Solidified NiAl-Cr Quasibinary Eutectic", ibid.
• R.J. Schaefer, D. Shechtman and F.S. Biancaniello, "Rapid Solidification Microstructures and precipitation in Al-Mn Alloys",MRS Meeting, Boston,MA, November 1983.
• R.J. Schaefer, D. Shechtman and F.S. Biancaniello, "Rapid Solidification Microstructures and precipitation in Al-Mn Alloys", MRS Meeting, Boston, MA, November 1983.
• J. Boettinger, D. Shechtman, T.Z. Kattamis and R.J. Schaefer,"The Effect of Rapid Solidification Velocity on Microstructure and Phase Stability Extension in NiAl-Cr Quasibinary Eutectic", 5th Conference on Rapid Quenching and Solidification of Metals, Sept. 1984, S. Steel and H. Warlimont, eds.
• S.F. Dirnfeld and D. Shechtman, "The Microstructure of Unidirectionally Solidified Ni- W Eutectic Composites", XIIIth Int. Congress of Crystallography, Hamburg, August 1984.
• D.P. Van Heerden, T. Aboud, D. Shechtman and M.P. Shaw, Microstructural Observations on Rapidly Solidified Gold Alloys", Proc. Conf. ElectronMicroscopy Society of Southern Africa, EMMSSA
• T. Aboud and D. Shechtman, "Rapid Solidification of Au-Ti Alloys", Fifth Israel Materials Engineering Conference, I.M.E.C.V., Technion, December 19-20 (1990).
• D. Shechtman, J.L. Hutchison and A. Feldman, "Twin Quintuplets in CVD Diamond" SPIE Vol. 1759 Diamond Optics V (1992)/81
• J.L. Hutchison and D. Shechtman, "HREM studies of CVD diamond films" EMAG93, Liverpool, England 1993
• J.L. Hutchison and D. Shechtman, "Defects in single grain of CVD diamond" Diamond conference, Bristol England 1993.
• D. Shechtman, "Defects and growth of Diamond Wafers",Proceedings of the San Francisco MRS meeting 1994 (Diamond Symposium).
• C.I.Llang, F.B. Biancaniello, S.D. Ridderf and D. Shechtman, "Characterization of an Al70.9Cu9Fe10B0.1 stable quasiperiodic material as a wear resistant thermal spray coating" in: "Powder Materials: Current Research and Industrial Practices", Edited by F.D.S. Marquis, TMS Fall Meeting proceedings, 1999
• Guo X and Shechtman D, "On the effect of Y additions to Mg-Zn rapidly solidified alloys" Proceedings of the second Israeli-Russian Bi-National Workshop 2003
• D. Shechtman, "Color Metallography by Heat Tinting" "Color Metallography" by E. Beraha and B. Shpigler, ASM publication (1977), 114-119.
• D. Shechtman and J. Hutchison, "The Role of Twins in the Growth of Diamond Wafers". "Twinning in Advanced Materials"TMS special publication (1994), 133.
• D. Shechtman, "Twins in Diamond Films" "Soft Order in Physical Systems" Y. Rabin and R. Bruinsma, editors. Plenum Press, 1994.

• D. Shechtman, R.J. Schaefer, and F. S. Biancaniello, "Precipitation in Rapidly Solidified al-Mn Alloys", Met. Trans. 15A, 11 (1984) 1987-97.
• D. Shechtman, W.J. Boettinger, T.Z. Kattamis and F.S. Biancaniello, "The Microstructure of Rapidly solidified NiAl-Cr Quasibinary Eutectic", Acta Metall. 32 (1984) 749-756.
• W.J. Boettinger, D. Shechtman, R.J. Schaefer, and F.S. Biancaniello, "The Effect of Solidification Velocity on the Microstructure of Ag-Cu Alloys", Met. Trans. 15A (1984) 55-66.
• L. Bendersky, R.J. Schaefer, F.S. Biancaniello and D. Shechtman, "Rapidly Solidified al-Cr Alloys: Structure and Decomposition Behavior", J. Mat. Sci., 21, 1889 (1986).
• I. Levi and D. Shechtman, "The Microstructure of Rapidly Solidified Ti-Fe Melt-Spun Ribbons", Met. Trans. 20A 1841 (1989).
• D.P. van Heerdan, T. Abud, D. Shechtman and M.P. Shaw, "Precipitation in Rapidly Solidified Au-Ti Alloys" Mat. Lett. 10 425 (1991).
• J.J. Ramon, D. Shechtman and S.F. Dirnfeld, "Rotating Water Layer Atomization Device and Resulting Material", Metal Powder Report, Jan. 1991.
• J.J. Ramon, S.F. Dirnfeld and D. Shechtman, "Al-Cr Powder Production Via Rotating Water Layer Atomization", J. of Metals and Materials, August 1992.
• X.Guo, J.Kinstler, L. Glazman and D. Shechtman, "High Strengh Mg-Zn-Y-Ce-Zr Alloy Bars Prepared by RS and Extrusion Technology" Materials Science Forum vol. 488-489 (2005) pp. 495-498.
• X Guo and D. Shechtman, "Extruded High-Strengh Solid Materials Based on Magnesium with Zinc, Yttrium and Cerium Additives", Glass Physics and Chemistry, Vol 31 No. 1, 2005, pp 44-52.
• R. Yearim and D. Shechtman, "The Effect of Microstructure on Properties of Rapidly Solidified Al-7Fe-Xcr. Proceedings of the Materials Engineering Conference, Technion, Haifa, Israel, December 1981.
• E.Y. Gutmanas and D. Shechtman, "High Pressure Compaction and Cold Sintering of Al Alloys", ibid.
• D. Shechtman and E.Y. Gutmanas, "Transmission Electron Microscopy of Cold Sintering Metallic Powders, ibid
• D. Shechtman, S.D. Ridder and R. Mehrabian, "The Structure of Micro particles made by the MPP Technique",Proceedings of the Third Conference of Rapid Solidification Processing, National Bureau of Standards, Gaithersburg, MD, U.S.A., December 1982.
• W.J. Boettinger, R.J. Schaefer, F. Biancaniello and D. Shechtman, "The Effect of Solidification Velocity on the Microstructure of Ag-Cu Alloys", ibid.
• D. Shechtman, T.Z. Kattamis, F.S. Biancaniello and W.J. Boettinger, "The Microstructure of Rapidly Solidified NiAl-Cr Quasibinary Eutectic", ibid.
• R.J. Schaefer, M. Rosen, J.J. Smith, D. Shechtman and R. Mehrabian, "Nondestructive Characterization of Rapidly Solidified al-Mn alloys", ibid.
• R.J. Schaefer, D. Shechtman and F.S. Biancaniello, "Rapid Solidification Microstructures and precipitation in Al-Mn Alloys", MRS Meeting, Boston,MA, November 1983.
• S.D. Ridder and D. Shechtman, "Microstructure of Supercooled Sub-Micrometer Aluminum-Copper Alloy Powder", ASTM Conference on Rapid Solidification of Aluminum Powders", Philadelphia, PA, (April 1984).
• W.J. Boettinger, D. Shechtman, T.Z. Kattamis and R.J. Schaefer,"The Effect of Rapid Solidification Velocity on Microstructure and Phase Stability Extension in NiAl-Cr Quasibinary Eutectic", 5th Conference on Rapid Quenching and Solidification of Metals, Sept. 1984, S. Steel and H. Warlimont, eds.
• D.P. Van Heerden, T. Aboud, D. Shechtman and M.P. Shaw, "Microstructural Observations on Rapidly Solidified Gold Alloys", Proc. Conf. Electron Microscopy Society of Southern Africa, EMMSSA, 20, 35-36 (1990).
• T. Aboud and D. Shechtman, "Rapid Solidification of Au-Ti Alloys", Fifth Israel Materials Engineering Conference, I.M.E.C.V., Technion, December 19-20 (1990).
• I Popov and D. Shechtman, "Rapidly Solidified Magnesium - Rich Alloys Containing Praseodymium" Proceedings of the 22nd Reso International Symposium on Materilas Science: Science of Metastable and Nanocrystalline Alloys; Structure, Properties and modeling. Editors: A.R.Dinesen et al. Riso National Laboratory, Roskilde, Denmark 2001.
• Guo X and Shechtman D, "On the effect of Y additions to Mg-Zn rapidly solidified alloys" Proceedings of the second Israeli-Russian Bi-National Workshop 2003.

• D. Shechtman, I. Blech, D. Gratias and J.W. Cahn, "A Metallic Phase with Long-Ranged Orientational Order and Broken Translational Symmetry", Phys. Rev. Letters, Vol 53, No. 20 (1984) 1951-1953.
• L.G. Swartzendruber, D. Shechtman, L. Bendersky and J.W. Cahn, "Nuclear Gamma Ray Resonance Observations in an Aluminum-based Icosahedral Quasi-Crystal", Physical Review, Vol. 32, No. 2 (July 1985) 1383-1385.
• D. Shechtman and Il Blech, "The Microstructure of Rapidly Solidified Al6Mn", Met. Trans. 16A (June 1985) 1005-1012.
• R. Portier, D. Shechtman, D. Gratias and J.W. Cahn, "High Resolution Electron Microscopy of the Icosahedral Quasiperiodic Structure in Al-Mn System", Journal de Spectroscopie et Microscopie Electronique, vol. 10, No. 2, (1985) 107-116.
• L. Bendersky, R.J. Schaefer, F.S. Biancaniello, W.J. Boettinger, M.J. Kaufman and D. Shechtman, "Icosahedral Al-Mn and Related Phases: Resemblance in Structure", Scripta Met. Vol. 19 (1985) 909-914.
• D. Shechtman, D. Gratias, J.W. Cahn, "Microscopic Evidence for Quasi-Periodicity in a Solid with Long-Range Icosahedral Order. C.R. Acad. Sci. Paris, t300, Series II, No. 18 (1985) 909-914.
• J.W. Cahn, D. Shechtman and D. Gratias, "Indexing of Icosahedral Quasi-Periodic Crystals", Journal of Materials Science Vol. 1, No. 1 Jan. 1986.
• R.J. Schaefer, L. Bendersky, F.S. Biancaniello, W.J. Boettinger and D. Shechtman, "Icosahedral and Decagonal Phase Formation in Al-Mn Alloys", Met. Trans. 17A, 2117- 2125 (1986).
• J.W. Cahn, D. Gratias and D. Shechtman, "Response to Pauling", Nature 319 (1986), 102.
• B. Mozer, J.W. Cahn, D. Gratias and D. Shechtman, "Neutron Diffraction Studies of the Icosahedral Phase of Al-Mn Alloys".Journal de Physique, July 1986, p. 351.
• D. Shechtman, "Quasiperiodic Crystals - Experimental Evidence". Journal de Physique - July 1986, p.1.
• D. Shechtman, "Metallurgical Aspects of Quasicrystals" Int. Workshop on Quasicrystals, Beijing, Sept. 1987.
• D. Shechtman, "The Icosahedral Quasiperiodic Phase," Physica Scripta, T23, (1988) 49- 53.
• I. Levi and D. Shechtman, "Amorphous and Quasi-crystalline Al-Cr-Si Phases Produced by Solid State Diffusion of Alternating Thin Layers" Geometry and Thermodynamics NATO ASI Series Vol. 229, Page 371, J.C. Toledano Editor. Plenum Press 1990.
• D. Shechtman and C.I. Lang, "Quasi-periodic Materials; Discovery and Recent Developments", MRS Bulletin, Vol 22 No 11, 1997.
• C I Land, D. Shechtman nd E Gonzalez, Friction and Wear Properties of Quasi-periodic Material Coatings, Bull. Mater.Sci., Vol 22 Number 3, May 1999.
• C.I. Lang, D.J. Sordelet, M.F. Besser, D. Shechtman, F.S. Biancaniello and E.J. Gonzalez, Quasicrystalline Coatings: Thermal Evolution of Structure and Properties", J. mater. Res., vol. 15 No. 9, Sept. 2000
• D. Shechtman and L.J. Swartzendruber, "Metastable Phases in Rapidly Solidified Aluminum-Rich al-Fe Alloys",Proceedings of the Materials Research Society, Boston, MA, U.S.A., November 1982.
• R. Portier, D. Shechtman, D. Gratias, J. Bigot and J.W. Cahn, "High Resolution Electron Microscopy of Aluminum Based Quasi-Crystals", EMAG 85, New Castle England, September 1985.
• D. Shechtman, "The Icosahedral Quasiperiodic Phase", Proceedings of the general conference of the International Union of Crystallographers, Perth, August 1987.
• C.I.Llang, F.B. Biancaniello, S.D. Ridderf and D. Shechtman, "Characterization of an Al70.9Cu9Fe10B0.1 stable quasiperiodic material as a wear resistant thermal spray coating" in: "Powder Materials: Current Research and Industrial Practices", Edited by F.D.S. Marquis, TMS Fall Meeting proceedings, 1999
• D. Shechtman, "The Making of Quasicrystals" "Quasicrystalline Materials", World Scientific (1988), 3-18.

• D. Shechtman, J.L. Hutchison, L.H. Robins, E.N. Farabaugh and A. Feldman, "Growth Defects in Diamond Films", J. Mater. Res., Vol. 8, No. 3, 473 (1993).
• A. Feldman, L.H. Robins, E.N. Farabaugh and D. Shechtman "Diamond as an Optical Material" chapter in "Characterization of Optical Materials", G. Exarhos, Editor, Butterworth-Heinemann, 1993 p. 71.
• D. Shechtman, A. Feldman and J.l. Hutchison, "High Order Twin Boundaries in CVD Diamond", Materials Letters Vol. 17 (5) 211 (1993).
• D. Shechtman, "Twin Determined Growth of Diamond Wafers", Materials Science and Engineering A184 (1994) 113
• O. Glozman, A. Berner, D. Shechtman and A. Hoffman, "Influence of Cr-N interlayer properties on the Initial Stages of CVD Diamond Growth on Steel Substrates", Diamond and Related Materials 7 (1998) 595
• O. Glozman, A. Berner, D. Shechtman and A. Hoffman, "Effect of Chromium Substrate Pretreatment on Diamond Growth by the Chemical Vapour Deposition Method". Microchem Acta, 15, 181-186 (1998)
• O. Glozman, G. Halperin, I. Etsion, A. Berner, D. Shechtman G.H. Lee and A. Hoffman, "Study of the wear behavior and adhesion of diamond films deposited on steel substrates by use of a Cr-N interlayer". Diamond and related materials 8 (1999) 859-864
• D. Shechtman "Twin quintuplet Surfaces in CVD diamond" J Mater Sci 41(2006) 7720-7724
• D. Shechtman, E.N. Farabaugh, L.H. Robins A. Feldman and J.L. Hutchison, "High Resolution Electron Microscopy of Diamond Film Growth Defects and Their Interactions". Proceedings SPIE, vol. 1534 Diamond Optics IV, (1991).
• J.L. Hutchison and D. Shechtman, "HREM studies of CVD diamond films" EMAG93, Liverpool, England 1993.
• J.L. Hutchison and D. Shechtman, "Defects in single grain of CVD diamond" Diamond conference, Bristol England 1993.
• D. Shechtman, "Defects and growth of Diamond Wafers", Proceedings of the San Francisco MRS meeting 1994 (Diamond Symposium).
• D. Shechtman and J. Hutchison, "The Role of Twins in the Growth of Diamond Wafers". "Twinning in Advanced Materials" TMS specialpublication (1994), 133.
• D. Shechtman, "Twins in Diamond Films" "Soft Order in Physical Systems" Y. Rabin and R. Bruinsma, editors. Plenum Press, 1994
• D. Shechtman, J.L. Hutchison and A. Feldman, "Twin Quintuplets in CVD Diamond" SPIE Vol. 1759 Diamond Optics V (1992)/81

• B. Grushko and D. Shechtman, "On the Model of Metastable Phase Formation by a Diffusion Process" J. Appl. Phys. 67, 2904 (1990).

• J.J. Ramon, D. Shechtman and S.F. Dirnfeld, "Synthesis of Al-Cr Intermetallic Crystals", Scripta Met. 24, 1087 (1990).
• L.A. Bendersky, R.S. Roth, J.J. Ramon and D. Shechtman, "Crystallographic Characterization of some Intermetallic Compounds in the Al-Cr System", Met. Trans. 22A 5 (1991).

• R.P. Matthews, C.L. Lang and D. Ssshechman, "Sliding Wear of Quasicrystalline coatings" Tribology letters 7 (1999) 179-181

• I. Popov, D. Starosvetsky and D. Shechtman, "Initial Stages of Corrosion Within Mg-Zn-Y-Zr in 1 g/l NaCl Solution" Journal of Materials Science 38 (2000) 1-8.

• New, fast corroding high ductility Mg-Bi-Ca and Mg-Bi-Si alloys, with no clinically observable gas formation in bone implants Author(s): Remennik S.; Bartsch I.; Willbold E.; et al Source: MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS Volume: 176 Issue: 20 Special Issue: SI Pages: 1653-1659 DOI: 10.1016/j.mseb.2011.07.011 Published: DEC 15 2011

• G.H. Cao a, D. Shechtman, D.M. Wu a, A.T. Becker, L.S. Chumbley, T.A. Lograsso, A.M. Russell, K.A. Gschneidner Jr. "Determination of Slip Systems and Their Relation to the High Ductility and Fracture Toughness of the B2 DyCu Intermetallic Compound" Acta Materialia 55 (2007) 3765-3770

• D. Gorni, D. Shechtman and D.G. Brandon, "Fatigue Properties of Electron Beam Welded Managing Steel Sheet", ibid.

• X. Guo and D. Shechtman " Reciprocating Extrusion of Rapidly Solidified Mg-6Zn-1Y-0.6Ce-0.6Zr.(Proceedings of the AFDM2006)

• D. Shechtman and L.J. Swartzendruber, "Metastable Phases in Rapidly Solidified Aluminum-Rich al-Fe Alloys", Proceedings of the Materials Research Society, Boston, MA, U.S.A., November 1982

• I. Goldfarb, E. Zolotoyabko and D. Shechtman "X-ray Diffraction Characterization of Ternary Artificial Superlattices", J. Appl. Phys. Aug.1993.
• D. Shechtman, D. van Heerden and D. Josell, "fcc Titanium in Ti-Al Multilayers", Materials letters 20 (1994) 329
• D. van Heerden, E. Zolotoyabko and D. Shechtman, Microstructural and Structural Characterization of Electrodepositted Cu/Ni multilayers" Materials letters(1994)
• I. Goldfarb, E. zolotoyabko, A. Berner and D. Shechtman, "Novel Specimen preparation Technique for the Study of multi component Phase Diagrams" Materials Letters 21 (1994) 149-154. (1994).
• D. Josell, D. Shechtman and D. van Heerden, "fcc titanium in Ti/Ni multilayers", Materials Letters 22 (1995) 275-279.
• D. van Heerden, D. Josell and D. Shechtman, "The formation of fcc titanium in titanium/aluminum multilayers", Acta. Mater. vol 44 no 1 (1996) 297-306
• D. van Heerden, E. Zolotoyabko and D. Shechtman, "Microstructural and strain in electrodeposited Cu/Ni multilayers" J. Matr. Res., vol. 11, No. 11, Nov. 1996.
• T. Tepper, D. Shechtman, D. van Heerden and D. Josell, Fcc Titanium in Titanium/Silver Multilayers" Materials Letters, 33 (1997) 181-184
• T. Tepper, D. Shechtman, D. van Heerden and D. Josell, "Allotropic Phase Formation in Ti/Zr Multilayers", Materials Letters 35 (1998) 100-107
• D. Josell, D. van Heerden, D. Read, J. Bonevich and D. Shechtman, "Tensile Testing Low Density multilayers: Aluminum/Titanium", J mater. Res. Vol 13No 10, Oct. 1998
• D. Josell, D. Van Heerden, D. Shechtman and D. Read, "Mechanical Properties of Multilayered Matrials" J.of Nanostructured Materials. Submitted June 1998

• I. Goldfarb and D. Shechtman, "Magnetron-Sputtered Co-Deposited Thin Films as a method for Construction of Multi-Component Phase Systems", Sixth Israel Materials Engineering Conference, Dead Sea, Feb. 1993
• I. Goldfarb, E. Zolotoyabko, A. Berner and D. Shechtman, "EDS and X-ray Diffraction Study of Ternary Artificial Superlattices", Sixth Israel Materials Engineering Conference, Dead Sea, Feb. 1993
• I. Goldfarb, E. Zolotoyabko and D. Shechtman, "Phase Formation in a Wedged Au-Ag-Cu Multilayered Structure" bMRS Spring Meeting, San Francisco, 1993
• D. van Heerden, D. Josell and D. Shechtman"Tensile tests of low density multilayer thin films" Proceedings of the MRS symposium "Policrystalline thin films II" MRS Fall Meeting , 1995

• X. Guo, J. Kinstler, L. Glazman and D. Shechtman, "High Strength Mg-Zn-Y-Ce-Zr Alloy Bars Prepared by RS and Extrusion Technology" Materials Science Forum vol. 488-489 (2005) pp. 495-498
• X. Gou and D. Shechtman, "Extruded High-Strength Solid Materials Based on Magnesium with Zinc, Yttrium and Cerium Additives", Glass Physics and Chemistry, Vol 31 No. 1, 2005, pp 44-52
• I Popov and D. Shechtman, "Rapidly Solidified Magnesium - Rich Alloys Containing Praseodymium" Proceedings of the 22nd Reso International Symposium on Materilas Science: Science of Metastable and Nanocrystalline Alloys; Structure, Properties and modeling. Editors: A.R.Dinesen et al. Riso National Laboratory, Roskilde, Denmark 2001.