BIO of Douglas Bammann

X close

I spent 26 and a half years at Sandia National Laboratories in Livermore, CA where I retired at a level designated as "Distinguished Member of the Technical Staff" immediately before beginning at MSU in the fall of 2007.

During my 29 years work experience at the national labs, university and industry, I was able to manage and secure external funding up to $104.75 million (projected in 2009-11). Some of my funding agencies include National Science of Foundation (NSF), US Department of Energy (DOE), US Department of Transportation (DOT), Oak Ridge National Lab, US Department of Defense, and US TACOM.

I have been involved in the application of these types of material models to manufacturing processes such as forging, forming welding, heat treatment and distortion and in particular the importance of accurate physically based modeling in predicting the material evolution during a multi-stage series of manufacturing processes of these types. My interests also include the utilization of differential geometry in the description of crystal defects to develop generalized continuum models capable of describing processes at the micro and nano level. My first major assignment was to develop and implement a temperature and strain rate dependent plasticity model to predict material state and failure in the B83 energy mitigating nose cone. This analysis was the first large scale three dimensional finite element simulation and appeared on the cover of �Discover Magazine� and the cover of John Zukas �Impact Dynamics� book. This was also the birth of �the Bammann Plasticity Model� that later became �the Bammann-Chiesa-Johnson (BCJ) Plasticity/Damage Model� that is the core foundation of research at the Center for Advanced Vehicular Systems (CAVS) at Mississippi State University (MSU).

I organized four major international symposiums on various topics related to metals and polymers at Sandia National Labs. I also organized symposia and was chair/co-chair as part of more than 100 international conferences. I have been reviewer for more than 15 international journals and I am on editorial board of prestigious journal the Archive of Mechanics. Apart from this, I have given numerous invited lectures at various universities, national labs, and industries. At the later part of my career at Sandia, I was invited to give the plenary lecture at the 2005 combined meeting of the ASME, ASCE and SES. In 2008, I was bestowed with the honor of a Fellow of the ASME and am currently nominated to become a Fellow of the American Academic of Mechanics.
I have taught graduate courses in �Continuum Mechanics�, graduate courses in �Inelasticity�, and developed and taught a graduate level course in �Advanced Inelasticity�, which I will teach again in Spring of 2010. I continue to advise undergraduate (1), graduates (2 MS, and 4 PhD), post-doc fellows (2), and research professors (4) in various projects. I have been interacting with various other research faculties, post-doc fellows, and PhD. Graduate students at CAVS. Also, I have had the privilege of continued consulting with Sandia National Lab.

In the year 2000, I led a team that won the prestigious R&D 100 research award on microstructure based modeling of manufacturing processes.

RESEARCH EXPERTISE:

Coupled physics theoretical modeling, finite deformation inelasticity, damage evolution, fracture, penetration, and impact; numerical modeling of nano- and microstructural mechanics; finite element analyses of manufacturing methods such as forming, forging, and other metal processing methods; crashworthiness, and high-rate deformation.

EDUCATION:

PhD 1981 University of Illinois, Urbana, Theoretical and Applied Mechanics
MS 1977 University of Illinois, Urbana, Theoretical and Applied Mechanics
BS 1973 Illinois State University Normal, Physics

EMPLOYMENT/TEACHING EXPERIENCE:

2007-present Professor � Mechanical Engineering, Mississippi State University, Mississippi State, MS
1981-2007 Distinguished Member of Technical Staff, (Continuum Mechanics, Plasticity and Failure of Metals), Sandia National Laboratories, Livermore, CA
2002-2003 Sabbatical at Georgia Tech � Taught Course on Advance Thermodynamics of Inelastic Deformation
1989-present Instructor and Course Director for National Association of Underwater Instructors (NAUI). Course Director Duties Include Organization Training (Including Principles of Modern Educational Philosophies) of Instructors for NAUI
1979-1980 Directed and Coordinated 10 Sections of Dynamics at UIUC
1976-1980 Taught 11 Courses in Statics and Dynamics at UIUC
1974-1975 Caterpillar Tractor Company, Mossville, IL
Worked in Vehicle Tests and Evaluation on Fatigue of Large Structures

HONORS/AWARDS:

SES Fellow - 2013
ASME Fellow - 2008
J. O. Smith Award for outstanding Teaching Assistant (1980)
R&D 100 Award (2000) for microstructure property model

SOCIETIES:

American Society of Mechanical Engineers � member since
2007-present Chair � Applied Mechanics Division and Materials Division Joint Committee on Constitutive Equations at ASME
Society of Engineering Science

www.flogen.org/

BIO of J. Brian Jordon

X close

Dr. J. Brian Jordon, is an Associate Professor in the Department of Mechanical Engineering at The University of Alabama. His research interests include, fatigue and fracture, constitutive modeling, process-structure-property-performance relationships, welding and joining, and solid-state additive manufacturing. Dr. Jordon has recently published a book on Fatigue of Friction Stir Welding, and in addition has authored over 100 journal articles and conference proceedings. His research has been supported by the Department of Energy, the Department of Defense, the State of Alabama, and various private industries. Professionally, Dr. Jordon has organized numerous symposia and chaired committees at international conferences such as the annual ASME International Mechanical Engineering Congress & Exposition (IMECE) and The Minerals, Metals, & Materials Society (TMS) meetings. In 2014, Dr. Jordon was a recipient of the TMS Young Professional Development award, and in 2017 he was a finalist for The University of Alabama President’s Faculty Research Award. He currently serves on the editorial board of Materials and Manufacturing Processes journal. Prior to coming to The University of Alabama, Dr. Jordon was an Interim Associate Director and an Assistant Research Professor at the Center for Advanced Vehicular Systems at Mississippi State University.

www.flogen.org/

BIO of Raj Prabhu

X close

Dr. Raj Prabhu is an Associate Director for the Computational Engineering Mechanics thrust at the Center for Advanced Vehicular Systems and an Associate Professor of Biomedical Engineering in the Department of Agricultural and Biological Engineering at Mississippi State University. Dr. Prabhu earned his doctoral degree in Mechanical Engineering from Mississippi State University, and he earned his bachelor’s degree in Chemical Engineering from the Indian Institute of Technology-Madras, Chennai, India. He also holds an Honorary Research position in the College of Engineering at Cardiff University, Cardiff, UK. He has extensively published in the research areas of biomaterials informatics, multiscale modeling and experimentation of the brain, specifically to investigate the mechanical and structural evolutions of the brain due to primary injuries arising from external mechanical insults. He also conducts research in computational mechanics, biomaterial informatics, and bio-inspired design. In his present position, he leads a team of several faculty, research engineers, post-doctoral research associates, graduate and undergraduate students to conduct research in integrated computational materials engineering, vehicular lightweighting, and human-centric design.

www.flogen.org/

BIO of Arunachalam Rajendran

X close

Arunachalam M. “Raj” Rajendran serves as Chair and professor for the Mechanical Engineering Department at the University of Mississippi (Ole Miss), Oxford, MS. Prior to joining the University of Mississippi, Dr. Rajendran served the U.S. Army Research Office as Chief Scientist for the Engineering Sciences Directorate in 2000-2008. At Ole Miss, he has received the School of Engineering 2012 Outstanding Teaching Award, 2016 Outstanding Faculty Award, and 2017 University’s Graduate School Exceptional Graduate Advising and Mentoring Award.

Dr. Rajendran has served in the Advisory Board Portfolio Review Panel for the Center for the Advancement of Science in Space (CASIS) / ISS U.S. National Laboratory (2015-2018) and in U.S. Corp oF engineers Laboratory’s basic research review panel (2011-2018). He is a Fellow of the American Society of Mechanical Engineers (1994), Fellow of the Society of Engineering Science (2012), Distinguished Fellow of ICCES, and Emeritus Fellow of the U.S. Army Research Laboratory (2000). He is the receiver of the ICCES’s Eric Reissner Medal (2007), and Life Time Achievement award (2011). Dr. Rajendran has published over 150 articles, and edited 10 books, and chaired over 50 international conferences and symposiums. He has given invited/keynote talks at over 100 universities and symposiums throughout the world. Dr. Rajendran obtained his PhD from the University of Washington, Seattle, WA in 1981.

www.flogen.org/