2023-Sustainable Industrial Processing Summit
SIPS2023 Volume 1. Assis Intl. Symp/ Advanced Iron & Steel Making
| Editors: | F. Kongoli, T. Usui, R.A. Vilela, J. A. de Castro, W. F. Santos, J. Poveromo, GS. Mahobia, B. Deo |
| Publisher: | Flogen Star OUTREACH |
| Publication Year: | 2023 |
| Pages: | 441 pages |
| ISBN: | 978-1-989820-72-8 (CD) |
| ISSN: | 2291-1227 (Metals and Materials Processing in a Clean Environment Series) |
CD shopping page
TIRE INJECTION AS FUEL IN BLAST FURNACES
Gerson de Araújo Filho1; Paulo Assis2;1MINAS GERAIS INSTITUTE OF WATER MANAGEMENT, Belo Horizonte, Brazil; 2UFOP, OURO PRETO, Ouro Preto, Brazil;
Type of Paper: Regular
Id Paper: 280
Topic: 2
Abstract:
This paper shows the study of the utilization of tire as fuel to be employed into blast furnaces. This tire can substitute coal or even charcoal in the blast furnaces tuyeres. The injection into tuyeres, other than contribute for energy generation, can produce gas for metallic oxide reduction, the former charged into the blast furnace throat, thus contribution for using other forms of wastes.
The tire, as powder, when to be injected into blast furnaces, contributes for an environmental employee of that waste, so as permit for obtaining a high value product. Then, one advantage of using such material is that it is waste and has lower cost for preparation.
A comparative study of combustion index of pulverized tires and coals was studied. For this study are been utilized one physical model, with thermal gradient constructed at Escola de Minas-UFOP.
The results obtained have showed that the tires have good combustibility, this was obtained in a model that simulate the same conditions occurring in the blast furnaces tuyeres; these results include tires and mixtures of tires with coal or even with charcoal.
Keywords:
Blast; Combustion; Energy; Furnace; Steel; SustainabilityReferences:
[1] ASSIS, P.S. & FILHO, G.A Technical and environmental aspects of tire injection into blast furnace tuyeres-some results. Presented In International Congress in Japan, November 2006, 4p.[2] FILHO, G.A, SALIERNO, G.F. & ASSIS, P.S. Technical and environmental considerations of the injection of tire into blast furnace tuyeres. Presented at TMS (The Minerals, Metals & Materials Society), 2006. International Conference held in San Diego. Honour to Prof. Sohn. August 2006, 6p.
[3] SON, G.A. & ASSIS, P.S. Technical aspects of tire dust injection in blast furnaces. Presented at the 61st ABM International Congress, Rio de Janeiro, July 2006, 10p.
[4] LIMA, GABRIEL P.K. Characterization and evaluation of the combustibility behavior of waste tires and their mixtures with mineral coal in thermobalances aiming at injection in blast furnaces. Master's Dissertation – UFRGS, Porto Alegre 2022, 201 p.
[5] SOUZA, R. D. E. S. Characterization of metallurgical coke produced with the addition of waste tires in coal mixtures. Federal University of Ouro Preto - UFOP; State University of Minas Gerais - UEMG. Ouro Preto, MG, p. 101. 2016.