2018-Sustainable Industrial Processing Summit
SIPS2018 Volume 6. New and Advanced Materials and Technologies

Editors:F. Kongoli, F. Marquis, P. Chen, T. Prikhna, N. Chikhradze
Publisher:Flogen Star OUTREACH
Publication Year:2018
Pages:392 pages
ISBN:978-1-987820-92-8
ISSN:2291-1227 (Metals and Materials Processing in a Clean Environment Series)
CD-SIPS2018_Volume1
CD shopping page

    New Surface Science Investigations for the Knowledge of Electrochemical Energy Storage

    Hervé Martinez1;
    1UNIVERSITé DE PAU ET DES PAYS DE L'ADOUR - IPREM CNRS UMR 5254, Pau, France;
    Type of Paper: Keynote
    Id Paper: 9
    Topic: 43

    Abstract:

    It is now generally accepted that the performance of all lithium ion or lithium batteries (including liquid or solid electrolyte) depends on the surface chemistry developed on the electrode / electrolyte interface system. This work presents a contribution to the knowledge of the solid electrolyte interface (SEI) from two different examples: The first one concerns Spinel Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> (LTO) which is considered as a good alternative negative electrode material for Li-ion batteries. The reactivity of LTO toward commons carbonates based electrolytes has been evidenced by surface analysis and an important gassing occurring at the electrode/electrolyte interface was reported. Therefore it is essential to better understand the interfacial phenomena. A precise understanding of the Spinel Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> (LTO) electrode/electrolyte interfaces in relation with batteries (Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>/Li half-cells) electrochemical performances is presented. The influence of various parameters (cycling temperature, electrode and electrolyte composition, cycling potential window) upon the SEI formation and dissolution through cycles is investigated. Finally, full cells as Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>/LiMn<sub>2</sub>O<sub>4</sub> cells having potential assets in term of cost and safety will be investigated, in order to point out the changes in the SEI formation due to interactions between both electrodes. The samples are analyzed using 3 complementary extreme surface characterization techniques XPS-AES-TOF-SIMS (analysis depth 1-10 nm), operating at different spatial resolutions.
    The second example is related to the recent technological development of miniaturized systems which has induced a strong demand for developing compact power sources with high efficiency and small dimensions that are suitable for portable devices. Among these systems, the lithium microbattery may be relevant for a wide range of applications (microelectronic devices). An all solid state battery LiCoO<sub>2</sub> / LiPON / Li is considered and more specifically the behaviour of the interface between the positive electrode and the solid electrolyte, studied by ion milling cross section / Auger Spectroscopy coupling.

    Keywords:

    Energy; New and advanced materials; storage and use;

    References:

    1. T. Ohzuku and A. Ueda (1994) Why transition metal (di) oxides are the most attractive materials for batteries. Solid State Ion., vol. 69, no. 3-4, pp. 201-211
    2. D. P. Abraham, E. M. Reynolds, E. Sammann, A. N. Jansen, and D. W. Dees (2005) Aging characteristics of high-power lithium-ion cells with LiNi0.8Co0.15Al0.05O2 and Li4/3Ti5/3O4 electrodes, Electrochimica Acta, vol. 51, no. 3, pp. 502-510
    3. J.B. Gieu, V. Winkler, C. Courriges, H. Martinez (2017) New insights in the characterization of the electrode/electrolyte interfaces within LiMn 2 O 4 /Li 4 Ti 5 O 12 cells, by X-ray Photoelectron Spectroscopy, Scanning Auger Microscopy and Time-of-Flight Secondary Ion Mass Spectrometry. Journal of Materials Chemistry A, 5 (29)
    4. Salot, R.; Martin, S.; Oukassi, S.; Bedjaoui, M.; Ubrig, J. (2009) Microbattery Technology Overview and Associated Multilayer Encapsulation Process. Appl. Surf. Sci., 256 (3 SUPPL.), S54-S57
    5. Uhart, J.B. Ledeuil, B. Pecquenard, F. Le Cras, M. Proust, H. Martinez (2017) Nanoscale chemical characterization of solid state microbattery stacks by means of Auger Spectroscopy and ion-milling cross-section preparation. ACS Applied Materials & Interfaces, 9 (38), pp 33238-33249

    Cite this article as:

    Martinez H. (2018). New Surface Science Investigations for the Knowledge of Electrochemical Energy Storage. In F. Kongoli, F. Marquis, P. Chen, T. Prikhna, N. Chikhradze (Eds.), Sustainable Industrial Processing Summit SIPS2018 Volume 6. New and Advanced Materials and Technologies (pp. 229-230). Montreal, Canada: FLOGEN Star Outreach